Electro-Dan SS20202014 Manual de usuario descargar pdf (Pagina 3)

Page 3 of 11

Operating the system

The SS20202014 has mains input and output sockets. These are in

the form of European style 3-pin connectors.

WARNING:

These connectors carry mains voltage of 230-250V AC and it will kill

you if care and consideration is not taken!

ATTENTION:

The units input must be properly Earthed (Grounded), failure to do

so may result in electric shock!

Wires used in the 3-pin connector:

Brown: Live

Blue: Neutral

Green/Yellow: Earth

This unit must also be fused with a 3 Amp (Red) fuse rated at 250V

AC.

Mains Outlet

There is a mains outlet socket. This can be used for switching an

external appliance. The appliance must have the appropriate plug

and must not have a current greater than 2 amps absolute

maximum (This is about 500 Watts). Remember that the appliance

will only be able to operate when the Surround Amplifier Unit is

switched ON. If in doubt, plug the appliance into a house mains

socket (or rated trailing socket).

Fuses

In the event of a failure, two fuses are used to protect the unit from

damage. Observe the ratings of these fuses. These should be

T0.4A (Time delay glass fuse rated at 250V AC) and F0.2A (Quick-

blow glass fuse rated at 250V AC).

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Electro-Dan SS20202014 Manual de usuario Pagina 3