Electro-Dan SS20202014 Manual de usuario descargar pdf (Pagina 8)

Page 8 of 11

which should be 20W minimum. The centre speaker should be rated

at 15W minimum. For best results, use speakers that are matched

for best sensitivity.

Cable used should be capable of passing the required power.

Thicker, higher quality cable will give better results.

Warning:

The centre speaker and the front speakers must be magnetically

shielded if they are placed near a Television. If this is not observed,

the cathode ray tube inside the TV will suffer.

Listening to the SS20202014

When you first listen to you surround sound amplifier; you need to

adjust it to the settings you prefer. Connect it up to you TV, VCR

etc. and find a good movie! More recent movies have the best

surround sound coding and these should be used.

If you are using the internal decoder, you may adjust the volume,

bass, treble and use the loudness to suit your needs on all

channels. A good test movie should make use of all frequencies so

you can adjust the bass and treble to the best possible preference.

The loudness can be used to increase the high and low frequencies

slightly when listening at low volumes.

You will notice that when there is speaking, sound only comes from

the front and centre channels. When there is action or music in the

movie, there should be sound from the rear channel. If this is not so,

make sure you are feeding the unit with a stereo signal (i.e.

NICAM® or that the movie is not old (and therefore only mono).

Modern music is also stereo and this surround sound unit can add

another dimension to many types of music from rock, pop to recent

classic.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Electro-Dan SS20202014 Manual de usuario Pagina 8